WEBINAR 

Learn more about blowout & kill simulations and how to perform them using Oliasoft WellDesign

Thursday, September 24, we hosted a Webinar on blowout and kill theory.

Could not attend? Watch a recording of the webinar here >>

The intention of the webinar was to learn our participants more about the factors that influence flow in a well out of control and which measures can be taken upfront to ensure that you will be able to control it.

During the webinar, we also demonstrated how easy it is to utilize Oliasoft's blowout and killing module to ensure that your design is robust - also from a blowout and kill point of view.

Want to learn more about the theory behind blowout and kill preparedness and how to conduct simulations in-house?

In this free Webinar, Thomas Selbekk, a well control engineer with
experience from several blowouts worldwide, will introduce you to the theory behind blowout & kill simulations and how to perform these in Oliasoft WellDesign.

Along with Trajectory, Casing and Tubing Design, Blowout & Kill is a module in the Oliasoft WellDesign package. The module provides a
probabilistic simulation of blowout rates as well as containing a
dynamic kill engine. The simulations take the uncertainty of the input
parameters into account, providing the blowout results as a probability range expressing various probabilistic scenarios.

The dynamic kill module contains a transient simulation model
providing required mud weight and pumping rates to kill the blowout,
and it calculates the required pumping resources based on the relief well constructed in the trajectory and casing modules.

In the webinar on September 24th, you can learn how to achieve this
easily in Oliasoft WellDesign.

Content of the webinar: 

  • Inflow performance
  • Lift curves
  • Blowout scenarios
  • Dynamic kill
  • Relief well design
  • Performing blowout and kill simulations in Oliasoft WellDesign

In this webinar you will learn: 

  • The theory behind blowout and kill simulations
  • How to use Oliasoft WellDesign to perform blowout and kill
    simulations
  • The opportunity to perform blowout and kill analysis in-house, improving engineering competence
  • How to use Oliasoft WellDesign to run sensitivities and optimize
    your well design
  •  
  • Practical information:
    When: September 24, 2020.
  • Time: Two webinars will be held this day - covering time zones for all potential participants.
    • Webinar #1, Asia & early in Europe:  9:00 - 10:30 CEST (UTC +2) | 15:00-16:30 AWST (UTC +8)
    • Webinar #2, America & late in Europe): 16:00 - 17:30 CEST (UTC +2) | 9:00 - 10:30 CDT (UTC -5)
  • Price: Free
    Where: Online. The link will be shared with the registered participants the day before the webinar.

Thomas Selbekk

Chief Revenue Officer at Oliasoft AS

Thomas has an MSc in Petroleum Engineering from NTH in Trondheim and has 30 years of experience from the oil industry.
Prior to joining Oliasoft, he worked 16 years as a blowout and kill expert with Add Energy,
and was central in the kill team combating the Macondo blowout in the Gulf of Mexico in 2010.

Oliasoft_Uteportretter_26

< Read more about Oliasoft WellDesign here >